Dr. Eng. Saeed Asiri

Associate Professor of Engineering

Certified PMP from PMI

Certified Inventor from US Patents and CACST

Certified Trainer from NCTT and TVTC

Dr. Eng. Saeed Asiri

Associate Professor of Engineering

Certified PMP from PMI

Certified Inventor from US Patents and CACST

Certified Trainer from NCTT and TVTC

Journal and Conference Articles

  • S. Asiri, A. Baz and D. Pines, “Periodic Struts for Gearbox Support System,” INTER-NOISE 2002, Dearborn, Michigan, USA, 19-21, (2002).
  • S. Asiri, A. Baz and D. Pines, "Active Periodic Struts for Gearbox Support System", Smart Structures Conference, San Diego, USA, March 14-18, (2004).
  • S. Asiri, A. Baz and D. Pines, "Active Periodic Struts for Gearbox Support System”, Proceedings of SPIE, V5386, 347-358, July (2004).
  • Aljawi, M. Abd-Rabou, and S. Asiri, "Finite Element and Experimental analysis of square tubes under Dynamic Axial Crushing", European Congress on Computational Methods in Applied Sciences and Engineering ECCOMAS 2004, Jyväskylä, Finlandm. 24-28, (2004).
  • Saeed Asiri, “Vibration Isolation of Automotive Vehicle Engine Using Periodic Mounting Systems,” SPIE 2005, San Diego, California, USA, March 4-9, (2005).
  • S. Asiri, A. Baz and D. Pines, “Periodic Struts for Gearbox Support System”, Journal of Vibration and Control, V11(6), 709-721, (2005).
  • S. Asiri. A. Baz and D. Pines, “Active Periodic Struts,”, Journal of Smart Material Structures, V15, 1707-1714, 2006.
  • S. Asiri, A. Aljawi, “Periodic Mounts to Isolate Vibrations of Automotive Vehicle Engine”, Smart Structures and MaterialsJKAU, Engineering Sciences, 17, No. 1, (2006).
  • Saeed Asiri, “Course website as an example of the potential positive impact of new technologies on the high education system”, JKAU, Engineering Sciences, 12, No. 2, pp3-17, (2006).
  • Saeed Asiri, “Tunable Mechanical Filter for wave propagation of Longitudinal Vibrations”, Shock & Vibration Journal, Vol. 14 Issue 5, p377-399, (2007). 
  • Asiri, "Vibration Attenuation of Automotive Vehicle Engine using Periodic Mounts", International Journal of Vehicle Noise and VibrationV3 (3), (2007).
  • S. Asiri, M. Abdulsalam, A. Alghamdi, "Dynamic Response of an Experimental Model for Offshore Platforms with Periodic Legs", JKAU, Engineering Science, V20(1), pp93-105, (2009)
  • Saeed Asiri, "Broadband Vibration Attenuation using Hybrid Periodic Rods", The Journal of Engineering Research, V5(1), (2010)
  • Asiri, Saeed, “Differential Agitator”, KACST patent, No. 06270232, (2010).
  • Saeed Asiri, "Design and Implementation of Differential Agitators to Maximize Agitating Performance”, International Journal of Mechanics and Applications, V2 (6), (2012)
  • S. Asiri, H. S. Hedia, W. Essa, " Vibration Attenuation Using Functionally Graded Material", World Academy of Science, Engineering and Technology, V78(1), pp693-702, (2013)
  • S. Asiri, Y. Alzahrani, "Theoretical Analysis of Mechanical Vibration for Offshore Platform Structures", World Journal of Mechanics, V4(1), pp1-11, (2014)
  • Liu, J. Moore, S. Aldousari, H. Hedia, S. Asiri, W. Liu, "A Statistical Descriptor Bases Micromechanics Model of Heterogeneous Material", Computational Mechanics (IF: 2.43), (2014).
  • S. Asiri and H. Diken, "Dynamic Modeling and Vibration Analysis of a Ball-Screw Drive System”, International Journal of Advance Research in Science and EngineeringIJARSE, Vol. 4, No.5, (2015).
  • Li, Y. Lian, L. Zhang, S. Aldousar, S. Asiri, "Cell and nanoparticle transport in tumour microvasculature: the role of size, shape and surface functionality of nanoparticles." Interface focus, 6.1, (2016).
  • S. Asiri, H. Hedia, N. Fouda. "Improving the performance of cementless knee prosthesis coating through functionally graded material." Materials Testing, 58, pp939-945. (2016).‏
  • S. Asiri, " Modal and Vibration Analysis of Functionally Graded Dental Implant", Yanbu Journal of Engineering and Science (YJES), Volume 12, (2016).
  • Li, Z. Liu, J. Zheng, J. Zhi, W. Lui, S. Aldousar, S. Asiri,"Modular-based multiscale modeling on viscoelasticity of polymer nanocomposites." Computational Mechanics, pp1-15, (2016).
  • S. Asiri, Saeed, “Smart Boat for Swimming Pool maintenance”, US patents Office, No. 10,713,918, (2020).
  • Saeed Asiri, "Vibration Attenuation Using Functionally Graded Materia ", World Academy of Science, Engineering and Technology, Toronto, Canada, 19-23, (2013).
  • Saeed Asiri, Seref D Akbas, and Mohamed A. Eltaher, “Dynamic Analysis of Layered Functionally Graded Viscoelastic Deep Beams with Different Boundary Conditions Due to a Pulse Load”, International Journal of Applied Mechanics, Vol. 12, No. 5, (2020).
  • Saeed A. Asiri, Seref D Akbas and Mohamed A. Eltaher, “Porosity effects on post buckling behavior of geometrically imperfect metal foam doubly curved shells with stiffeners”, Structural Engineering and Mechanics, Vol. 75, No. 6 (2020)
  • Saeed Asiri, Mohammed. A. Kassem, M. A. Eltaher, Khaled M. Saad, “Novel Coordination Compounds Based on Copper Complexes with new Synthesized Schiff bases and Azo-dyes as Sensitizers for Dye-Sensitized Solar Cells Spectral and Electrochemical”, Int. J. Electrochemical. Sci., 15 (2020)
  • Saeed Asiri, Seref D Akbas and Mohamed A. Eltaher, “Predictive model for spherical indentation on elastoplastic nanocomposites Loading and unloading behavior”, Structural Engineering and Mechanics, Vol. 75, No. 6. (2020)
  • Saeed Asiri, Seref D Akbas and Mohamed A. Eltaher, “Damped dynamic responses of a layered functionally graded thick beam under a pulse load”, Structural Engineering and Mechanics, Vol. 75, No. 6, (2020).
  • Saeed Asiri," Vibration Analysis and Optimization of Wind Turbine Blade with Composite Materials”, 2nd International Conference on Advancing Knowledge from Multidisciplinary Perspectives in Engineering & Technology (ICAKMPET-21), 22nd - 23rd December, Istanbul, Turkey, 24-28, (2021).
  • Saeed Asiri." Finite element analysis of single dry clutch with functional graded aluminum matrix composite and silicon carbide reinforced", Science International, 33(9), 305-314, (2021).
  • Saeed Asiri., A. Wagih, and M. A. Eltaher. "Predictive model for spherical indentation on elastoplastic nanocomposites: loading and unloading behavior", Ceramics International 45.3 (2019): 3088-3100.
  • Saeed Asiri. " Mechanical Behavior of Composite and FGM Transmission-Back Hub Automotive Drive Shaft", Science International, Vol. 33, No. 3, 207-21, (2021).
  • Almashhor, A. , Asiri, S.A. “A New Tuned Vibration Absorber Based on One-Degree-of-Freedom of Translational Motion”, Int Appl Mech 57, 373–377, (2021). https://doi.org/10.1007/s10778-021-01088-0
  • Saeed Asiri." Elastic Behavior of Lay-Ups Angles of Laminated Composite Beam with Material Property Grading", International Journal of Innovative Technology and Exploring Engineering (IJITEE), 10(9) (2021): 44-51.
  • Saeed Asiri." A Failure Mechanism Study of Boiler Water-Wall Tube using Numerical and Experimental Analysis", International Journal of Innovative Technology and Exploring Engineering, 10(10) (2021): 64-74.
  • Abobakr Almashhor and Saeed A. Asiri. “Development of a new tuned vibration absorber based on one degree-of-freedom of translational motion”, Cogent Engineering, 8:1, (2021), 1976929, DOI: 10.1080/23311916.2021.1976929
  • Saeed Asiri." Modeling and Analysis of Novel Spring made of Functionally Graded Material" Science International, 33(5) (2021): 371-378.
  • Hamza Diken and Saeed Asiri, “Parametric study of flapwise and edgewise vibration of horizontal axis wind turbine blades”, Advances in Mechanical Engineering, Vol. 13(9) 111, (2021)
  • Saeed Asiri. “Numerical study of double-sided impact on a single plate”, Australian Journal of Mechanical Engineering, (2021), DOI: 10.1080/14484846.2021.2005864.
  • Saeed Asiri, "Numerical analysis of single dry clutch using functional graded aluminum matrix composite with silicon carbide reinforced", International Journal of Vehicle Noise and Vibration Vol. 18(2), (2022).
  • Dirbas andS. Asiri, "The Vibrational Behavior of The Vehicle at The Road Humps with Different Suspension Systems", International Journal of Vehicle Noise and Vibration, Vol. 18(2), (2022).
  • Saeed Asiri. “Vibration Analysis and Optimization of Wind Turbine Blade with Composite Materials”, International Journal of Mechanical Engineering, Vol. 7, No. 1, pp. 6247-6259, (2022).
  • Ali, Nasir, Mansour F. Yassen, Saeed Asiri, Rashid Nawaz, Laiq Zada, Mohammad Mahtab Alam, and Ndolane Sene. "Research Article New Iterative Method for Solving a Coupled System of Fractional-Order Drinfeld–Sokolov–Wilson (FDSW) and Fractional Shallow Water (FSW) Equations." Journal of Nanomaterials (2022).
  • Asiri, Saeed. "Active Treatment of Water Chemistry for Swimming Pools Using Novel Automated System (NAS)." Bioinorganic Chemistry and Applications, (2022).
  • Al-Duais, Fuad S., Saeed Asiri, Anwar Saeed, Jihen Majdoubi, Mohammad Mahtab Alam, and Taza Gul. "Electro-Magnetohydrodynamic Fractional-Order Fluid Flow with New Similarity Transformations." Journal of Nanomaterials, (2022).
  • Saeed Asiri. "Elastic Behavior of Uncemented Hip Prosthesis Made of Composite with Material Property Grading." Journal of Nanomaterials, (2022).
  • Saeed Asiri. "Comparative modal analysis on fishing rod made of functionally graded composite material using finite element analysis." Journal of Applied Biomaterials & Functional Materials, (2022): 22808000221089774.
  • Ali, Ibrahim A., and Saeed Asiri. "Thermal and mechanical analyses of dry clutch disk made of functionally graded aluminum matrix composite." Materials Research Express 9, no. 4 (2022): 046507.
  • Saeed Asiri. "Mechanical Behavior of Helical Spring Made of Composite with and without Material Property Grading under Stable Load." Journal of Nanomaterials 2022 (2022).
  • Li, Yong-Min, Ikram Ullah, N. Ameer Ahammad, Inayat Ullah, Taseer Muhammad, and Saeed Asiri. "Approximation of unsteady squeezing flow through porous space with slip effect: DJM approach." Waves in Random and Complex Media (2022): 1-15.
  • Saeed Asiri. "Design and analysis of cementless hip-joint system using functionally graded material." Archive of Mechanical Engineering 69 (2022).
  • Asiri, Saeed A., Elias M. Salilih, Khaled M. Alfawaz, Ageel F. Alogla, S. Mohammad Sajadi, and Osama K. Nusier. "Heat transfer analysis of a water/lithium-bromide vapor generator system used for battery thermal development." Journal of Energy Storage 53 (2022): 105118.
  • Ali, Qasim, Mansour F. Yassen, Saeed Ahmed Asiri, Amjad Ali Pasha, and Kashif Ali Abro. "Role of viscoelasticity on thermoelectromechanical system subjected to annular regions of cylinders in the existence of a uniform inclined magnetic field." The European Physical Journal Plus 137, no. 7 (2022): 1-10.
  • Asiri, Saeed A., Elias M. Salilih, Khaled M. Alfawaz, Ageel F. Alogla, S. Mohammad Sajadi, and Osama K. Nusier. "Transient heat transfer analysis of serially connected array of phase change material in the thermal battery units with Al2O3 working Nano fluids." Journal of Energy Storage 53 (2022): 105184.
  • Asiri, Saeed A., Elias M. Salilih, Khaled M. Alfawaz, Ageel F. Alogla, Nidal H. AbuHamdeh, and Osama K. Nusier. "Improve the performance of renewable energy conversion and storage via ANN in a system of solar water heater with variable speed photovoltaic circulating pump." International Journal of Energy Research.